OnePlus 7 Pro Stock Firmware Collections [Back To Stock ROM]
Since Android is a highly customizable software and there is always a possibility that you may end up in a situation of lagging, boot loops or soft brick. Then, this guide will be helpful. It is always good to keep the OnePlus 7 Pro stock firmware with you in case something went wrong.
OnePlus 7 Pro Specifications:
OnePlus 7 Pro is the best ever smartphone made by OnePlus. The company has mentioned that they had given a lot of effort into this device to make it a more premium and flagship killer. The OnePlus 7 Pro comes with a Quad HD+ 2K+OLED 6.7-inch display with a resolution of 3120 × 1440 pixels. The display also features a 90Hz refresh rate for a smoother seamless performance. It’s also compatible with HDR10+ technology, features an on-screen fingerprint scanner, Night Mode 2.0 as a Bluelight filter, etc.The handset is powered by the octa-core Qualcomm 7nm process based Snapdragon 855 SoC coupled with Adreno 640 GPU delivers the liquid cooling system as well. The device is packed with 6GB/8GB/12GB of LPDDR4X RAM and 128GB/256GB of UFS 3.0 internal storage options. It runs on Android 9 Pie on the top of OxygenOS 9.
The dual Nano-SIM smartphone has a USB Type-C port, Face Unlock, Bluetooth 5.0, Dolby ATMOS, Wi-Fi 802.11 a/b/g/n/ac (dual-band), NFC, GPS, GLONASS, A-GPS, etc. The device packs a 4,000 mAh battery with OnePlus WARP charge 30 technology.
The rear features a triple camera setup of 48MP Sony IMX586 sensor (f/1.6) + an 8MP Telephoto lens (f/2.4) + 16MP ultra-wide angle lens (f/2.2) with dual LED flash. The rear cameras can record videos 4K@30/60fps, 1080P@30/60fps, Super Slow Motion, etc. It features Time LAPSE, video editor, Panorama, Portrait, HDR, Nightscape, etc. While the front features a 16MP Sony IMX471 sensor (f/2.0) with EIS, fixed focus mode. The selfie camera can record 1080P videos @30fps with Time Lapse, Face Unlock, HDR, etc.
OnePlus 7 Pro Stock Firmware Collections
OnePlus runs OxygenOS on all its device which is fairly simple yet filled with features. This is why a lot of people like OnePlus devices. However, there are times when the firmware of OnePlus devices crashes, lags, and create problems. This can be solved by installing the stock firmware again on the device.Stock firmware is the factory firmware which comes pre-installed on the device. Installing Stock firmware on your OnePlus 7 Pro will get rid of any software problem you might have in your device. So here is OnePlus 7 Pro stock firmware collection which you can download and flash in your device. Today in this guide will help you to install stock firmware in OnePlus 7 Pro. It is always good to keep OnePlus 7 Pro stock firmware with you in case something went wrong.
If you’re also facing problems in your device like screen freezing, unresponsive, camera fail, boot loops, slow performance, etc. Then you can install stock firmware to fix these problems. Check the other advantage of Stock Firmware given below.
The Advantage of Stock Firmware
- Flash Stock To Unbrick your OnePlus 7 Pro
- Flash Stock ROM to Fix the boot loop problem
- Upgrade and Downgrade OnePlus 7 Pro
- Unroot or Fix Bugs on your phone
- To fix the lag or stutter on OnePlus 7 Pro
- By flashing Stock ROM, you can solve software problems.
- Revert back to stock to gain your warranty.
Supported OnePlus 7 Pro:
Packages with build tag GM21AA are supported on the following variants:- GM1911: India
- GM1917: Global/US Unlocked (?)
- GM1913: EU
- GM1915: T-Mobile
List of OnePlus 7 Pro Stock Firmware Collections:
Latest Update for Global and Indian variants with GM21AA:
DOWNLOAD NOWOnePlus7ProOxygen_21.O.13_OTA_013_all_1907122230
MD5: 964c2e523dce00056805dd205efdc40f 9.5.9: OnePlus7ProOxygen_21.O.12_OTA_012_all_1907050210 MD5: 5163a71d5fbcaa2d16929cc767ec825b
9.5.8: OnePlus7ProOxygen_21.O.11_OTA_011_all_1906160627 MD5: d921b2cc01f19443a3572756bd510749
9.5.7: OnePlus7ProOxygen_21.O.10_OTA_010_all_1906040003 MD5: 53e71fc8720eb42085599ef27af0c5e3 9.5.6: OnePlus7ProOxygen_21.O.09_OTA_009_all_1905251729 MD5: 92d7eb9fe3db4e9859668e89a375cfa9 9.5.4: OnePlus7ProOxygen_21.O.08_OTA_008_all_1905230032 MD5: e76810e69588bf0c7e75b0194ce3c453 9.5.3: OnePlus7ProOxygen_21.O.07_OTA_007_all_1905120542 MD5: 818f147bea2c44cb00d3cb99af1422b6
9.5.10: OnePlus7ProOxygen_21.E.14_OTA_014_all_1907122240 MD5: 4cbb1d0b9a0e4dff53043cdd43920c21 9.5.9: OnePlus7ProOxygen_21.E.13_OTA_013_all_1907050211 MD5: ff22064c39628def117692877d874588
9.5.8: OnePlus7ProOxygen_21.E.12_OTA_012_all_1906160800 MD5: 5220bf1bc1413278a3040ad2c11bd10a
9.5.7: OnePlus7ProOxygen_21.E.11_OTA_011_all_1906040003 MD5: a0c984211445ddbcbce7df76de10c0c4 9.5.5: OnePlus7ProOxygen_21.E.09_OTA_009_all_1905230034 MD5: 213608e36b780d55106c4e70336a807b 9.5.4: OnePlus7ProOxygen_21.E.08_OTA_008_all_1905150058 MD5: fcec14e2ec053d67c793a27bfdef17d0
Download OnePlus 7 Pro Flash File: alternate external link
How to Flash OnePlus 7 Pro:
1- Install Qualcomm Driver.2- Make sure your device getting identified in device manager as Qualcomm HS-USB Diagnostic 9008.
3- Use both Volume as boot key.
4- Run MSM Download tool.
5- Click on verify, if it display message ok then you are ready to go.
6- Click on start to Flash.
7- Download Progress will be displayed.
8- When completed, Download complete will be displayed.
How to install Stock Firmware on OnePlus 7 Pro
Before installing, make sure to follow the pre-requisite and install the necessary drivers and tools on your PC.Pre-Requisites:
- This ROM is supported only for OnePlus 7 Pro.
- You should have a working Windows PC/Laptop
- Download and Install the latest OnePlus USB Driver for Windows and MAC. [For All Android USB Drivers]
- Download ADB Drivers: download ADB Fastboot drivers
- Download: Download the below given required files on your PC.
- Charge your phone to at least 50% before upgrading your phone.
- Take a complete backup of your phone data [Follow any method If you already have TWRP: then you can Create and Restore Nandroid Backup via TWRP
GetDroidTips
will not be responsible for any internal/external damages to the device
that may happen while/after following this guide. Please proceed if you
know what you’re doing!
Instructions to Install on OnePlus 7 Pro:
Before installing, make sure to follow the pre-requisite and install the necessary drivers and tools on your PC.- First of all enable the Developer Option, To Enable the Developer Option, Go to your Settings -> About -> Software Information -> More -> Now Tap on the Build Number 7-8 Times until you see a toast message “Developer option enabled“.
- Once your developer option is active, Go back to your settings -> Open developer option -> Enable USB Debugging.
- Download and Install ADB and fastboot driver for windows or ADB and Fastboot for Mac.
- Extract the OxygenOs.Zip file.
- Copy the Extracted OxygenOs zip to the folder where adb installed.
- Reboot
your phone into recovery mode. To do this, shut down your device and
turn it back on while holding the power and volume down buttons
simultaneously.
- In recovery, choose “Install from USB” option in the recovery screen, tap OK to confirm. A screen with “You are in sideload mode” will be displayed.
- Connect your OnePlus 7 Pro to PC/Mac using the USB Cable.
- Now
in your PC, open the extract ADB Fastboot folder and Press and hold
Shift key and Right click on your mouse to open the command prompt
window.
- Now type the command in your command window.
adb devices
- If you see a pop up to allow USB Debugging on your phone, Click OK.
- Now flash the OxygenOSZip file using the below command. (filename is the downloaded zip file name)
For Windows: “adb sideload <filename>”For Mac/Linux: “/adb sideload <filename>"Wait a while, your phone should now update to the selected build and reboot automatically to take you into OxygenOS.
I hope you installed the Stock ROM on OnePlus 7 Pro successfully, Now please rate this website with your comment. We always welcome feedback and improvements.
